Asbestos is known to be a fibrous silicate mineral resistant to heat and notoriously found in ceiling tiles, insulation, floor tiles, cement siding, and many other building materials. Asbestos is a fire-resistant material that has been used in the building trade to provide cheap and fire-safe insulation. It is one of the harmless minerals as long as it stays inside the materials it is being used.
The production of Asbestos was recently banned in the united states in 1999, but however, it still exists in buildings and products that were already installed.
HOW DOES ASBESTOS WORKS?
Here we will be unlocking you to the liberal ideas you will need to test for Asbestos, but before we get into that, it is a vital thing for us to let you know where to test for Asbestos.
WHERE TO TEST FOR ASBESTOS.
Here are some of the areas where you can test for Asbestos: asbestos cement products, textured coatings, floor tiles, sprayed coatings on ceilings, walls, lagging, and guttering. There are many areas to test for Asbestos, but we are much focused on how to test for Asbestos.
TESTING FOR ASBESTOS.
If you are into testing or Asbestos, it is essential to avoid breaking a piece off to send for sampling. If you identify that only a piece is broken off naturally, then you can send it for the sampling. Sending for sampling should be carried out if there is an absence of risk of broadcasting the debris.
However, if there is a risk of dust spreading, you will have to contact UKAS accredited laboratory to collect the samples.
So, here are the steps to follow to test for Asbestos when there is no spreading of debris.
Moistening the sample
Putting the sample in a self-sealing bag
Put the sample again in another self-sealing polythene bag
Make arrangements for UKAS for analysis.
See more at asbestos testing.